Advertisement
Step 15: Attach Access Ladder/Rope Wall Assembly
Part 2
B: Starting with the top of the rope ladder, insert the bolt through the hole in (025) RW-AL Support and tighten bolt
to connect it to the (M8) t-nut (previously installed). Attach the sides of the rope ladder to each access rail and the
bottom end into the (027) Rope Bottom using the flat washers and lock nuts provided. (Fig. 15.3 and 15.4)
Fig. 15.3
Included
Hardware
025
Included
Hardware
Fig. 15.4
Included
Flat Washer
Rope
Ladder
40
Rope
Ladder
Included
Hardware
Other Parts
Rope Ladder with Hardware
Advertisement
