KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 43

Step 16: Attach Steel Hand Grips and Handrail to Fort
Part 2
A: On the inside edge of (083) Back Wall Panel, measure 2" up from the floor and place EN71 Hand Rail so it is
flush to the edge as shown in fig. 16.4. The bottom of the Handrail should be centered on (021) Left Access. Pre-
drill holes using a 3/16" (4.8 mm) drill bit then attach EN71 Hand Rail using 2 (WL3) 1/4 x 1-3/8" Wafer Lags (with
flat washer). (fig. 16.3 and 16.4)
Fig. 16.3
083
021
WL3
Hardware
2 x 1/4 x 1-3/8" Wafer Lag
WL3
(1/4" flat washer)
43
Fig. 16.4
EN71 Hand Rail
1/4" Flat Washer
1/4" Flat Washer
083
WL3
021
Other Parts
1 x EN71 Hand Rail