Advertisement
Step 15: Attach Access Ladder/Rope Wall Assembly
Part 3
C: Place (151) Support Diagonal so that the angled end is flush to the front edge and to the bottom of (021) Left
Access Rail. The opposite end should be tight against (083) Wall Panel Back. Attach (151) Support Diagonal to
(021) Left Access Rail using 1 (H10) 1/4 x 2-1/4" Hex Bolt (with lock washer, flat washer and t-nut). (fig. 15.5 and
15.6)
D: Center 1 Corner Panel Bracket on each side of (151) Support Diagonal so that each bracket is flat against
the brace and the wall panel as shown in (fig. 15.4). Attach each Corner Panel Bracket using 4 (S0) #8 x 7/8"
Truss Screws. (fig. 15.5 and 15.6)
Fig. 15.6
Corner
Panel
Bracket
x 4 per
S0
side
151
Wood Parts
1 x
Support Diagonal 15/16 x 3-1/4 x 23-11/16"
151
083
1/4" Flat Washer
H10
1/4" Lock Washer
Fig. 15.5
083
021
1/4" T-Nut
Hardware
8 x
#8 x 7/8" Truss Screw
S0
1 x
1/4 x 2-1/4" Hex Bolt (with 1/4" lock washer,
H10
1/4" flat washer and 1/4" t-nut)
41
151
021
Other Parts
2 x Corner Panel Bracket
Advertisement
