KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 55

Step 21: Swing Post Assembly
Part 2
D: Place Swing End of (201) Engineered SW Beam in between Heavy L-Brackets assembled in Step A making
sure holes are lined up then attach Swing Post Assembly to Swing Beam Assembly using 1 (G20) 3/8 x 4" Hex
Bolt (with 2 flat washers and lock nut) through Heavy L-Bracket. (fig. 21.5)
E: Attach (201) Engineered SW Beam to Heavy C-Bracket with 1 (G17) 3/8 x 6" Hex Bolt (with 2 flat washers,
plastic formed washer and lock nut). (fig. 21.6)
3/8" Lock
3/8" Flat
Nut
Washer
Heavy
L-Bracket
Fig. 21.5
1 x
G17
1 x
G20
201
3/8" Flat
Washer
G20
Plastic
Formed
Washer
201
Heavy C-Bracket
Hardware
3/8 x 6" Hex Bolt
(3/8" flat washer x 2, plastic formed washer & 3/8" lock nut)
3/8 x 4" Hex Bolt
(3/8" flat washer x 2 & 3/8" lock nut)
55
Fig. 21.6
3/8" Lock Nut
3/8" Flat
Washer
3/8" Flat
Washer
G17