KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 50

Step 19: Install Bell Assembly
Part 1
A: Place (191) Bell Top on top of (192) Bell Support so the angled and back edges are flush then attach with 3
(S20) #8 x 1-3/8" Wood Screws. Repeat by attaching (193) Bell Top Right to top of (192) Bell Support. Rounded
ends of (191) Bell Top and (193) Bell Top RT are at the bottom. (fig. 19.1 & 19.2)
B: Centred above the door on (073) Narrow Front Panel place each Bell Support Assembly so they are tight and
form a peak then attach to (073) Narrow Front Panel with 1 (S3) #8 x 2-1/2" Wood Screw and 1 (S11) #8 x 2"
Wood Screw per assembly. (fig. 19.3)
Fig. 19.1
Top View
Fig. 19.3
Wood Parts
1 x Bell Top 5/8 x 3-3/8 x 11-1/4"
191
2 x Bell Support 1-1/2 x 1-1/2 x 10-5/8"
192
1 x Bell Top RT 5/8 x 3-3/8 x 11-1/4"
193
073
S3
S11
S3
Hardware
2 x
S11
6 x
S20
2 x
S3
S20
191
#8 x 2" Wood Screw
#8 x 1-3/8" Wood Screw
#8 x 2-1/2" Wood Screw
50
Front of assembly
Back of assembly
(next to fort)
Fig. 19.2
Flush
192
193
S20