Advertisement
Step 3: Nest Ladder Assembly
A: Place (031) Nest Left Access on one side of 3 (033) Nest Treads and (032) Nest Right Access on the other
side with the grooves facing in. (fig. 2.1)
B: Fit each (033) Nest Tread into grooves on both (031) and (032) Access rails, making sure the top edge of the
(033) Nest Treads are flush to the front of the Access rails. (fig. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8" drill bit and attach rails and treads together using 4 (S3) #8 x 2-1/2" Wood
Screws per tread. (fig. 2.1)
D: Place (034) Nest Ladder Gap on each access rail so there is a 2-3/8" gap between (034) Ladder Gap and the
top (033) Nest Tread. Attach using 4 (S20) #8 x 1-3/8" Wood Screws. (fig. 3.3)
E: Center a second Ladder Gap between the bottom Tread and the bottom ends of the access rails and attach
using 4 (S20) #8 x 1-3/8" Wood Screws.
Fig. 3.1
033
031
S3
Fig. 3.3
Wood Parts
1 x
Nest Left Access 1-3/8 x 2-1/2 x 41-1/8"
031
1 x
Nest Right Access 1-3/8 x 2-1/2 x 41-1/8"
032
3 x
Nest Tread 15/16 x 3-1/4 x 17-1/2"
033
2 x
Nest Ladder Gap 5/8 x 3-1/4 x 19"
034
Nest Access Ladder
Nest Access Ladder
032
x 6 per
side
034
12 x
Fig. 3.2
End View
Flush to
top edge
Hardware
#8 x 2-1/2" Wood Screw
S3
8 x
#8 x 1-3/8" Wood Screw
S20
24
033
\
\
\
Top Edge of
Flush to
Access Rail
edges
S20
x 2 per side
034
Advertisement
