Advertisement
Step 2: Access Ladder/Rope Wall Assembly
Part 1
A: Place (021) Left Access on one side of 4 (023) Treads and (022) Right Access on the other side with the
grooves facing in. (fig. 2.1)
B: Fit each (023) Tread into grooves on both (021) and (022) Access rails, making sure the top edge of the (023)
Treads are flush to the front of the Access rails. (fig. 2.1 and 2.2)
C: Pre-drill pilot holes with a 1/8" drill bit and attach rails and treads together using 4 (S3) #8 x 2-1/2" Wood
Screws per tread. (fig. 2.1)
Fig. 2.1
023
Fig. 2.2
End View
Wood Parts
1 x
Left Access 1-3/8 x 2-1/2 x 57-53/64"
021
1 x
Right Access 1-3/8 x 2-1/2 x 57-53/64"
022
4 x
Tread 15/16 x 3-1/4 x 19-1/2"
023
Flush to
top edge
S3
\
\
\
Flush to
edges
16 x
#8 x 2-1/2" Wood Screw
S3
S3
023
Top Edge of Access Rail
Hardware
22
022
021
Advertisement
