KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 35

Step 12: Floor Assembly
Part 1
A: Place 1 (121) Floor Board tight to (071) Nest End Panel and place a second (121) Floor Board tight to (081)
SW Wall Panel. Attach each Floor Board to the (092) Side Joists with 4 (S20) #8 x 1-3/8" Wood Screws per board.
(fig. 12.1 and 12.2)
B: From underneath, place (122) Long Floor Joist centered and tight to the bottom of each (121) Floor Board.
Make sure that (122) Long Floor Joist is centred over the pilot holes on the (071) Nest End Panel and (081) SW
Wall Panel then attach with 2 (S4) #8 x 3" Wood Screws per panel. Attach (121) Floor Boards to (122) Long Floor
Joist with 2 (S20) #8 x 1-3/8" Wood Screws per board. (fig. 12.1, 12.2 and 12.3)
Fig. 11.2
092
A
122
Wood Parts
2 x Floor Board 5/8 x 4-1/2 x 35-5/8"
121
1 x Long Floor Joist 1-1/4 x 3 x 63-1/4"
122
Tight
121
x 6 per
S20
board
Tight
Fig. 11.1
071
081
092
Hardware
12 x S20 #8 x 1-3/8" Wood Screw
4 x #8 x 3" Wood Screw
S4
35
Fig. 11.3
S4
081
081