KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 37

Step 13: Attach Wall Tops
A: In the opening of (081) SW Wall Panel, from the inside, place (131) SW Wall Top, tight to the corner of the
panels with overhang facing in. Attach using 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 13.1 and
13.2.
B: In the opening of (083) Wall Panel Back, from the inside, attach (132) Wall Top tight to the corner of the panel
with overhang facing in using 1 (S11) #8 x 2" Wood Screw at each end as shown in fig. 13.1 and 13.3.
C: At the top of each slat, flush to the wall tops, attach 1 Corner Bracket using 3 (S37) #7 x 5/8" Pan Screws per
bracket. (fig. 13.1 and 13.3)
Fig. 13.2
Inside View
Tight
Fig. 13.1
Wood Parts
1 x SW Wall Top 15/16 x 2-3/8 x 33-1/2"
131
1 x Half Wall Top 15/16 x 2-3/8 x 39"
132
071
Fig. 13.3
Inside View
S11 x 1 per end
per board
Corner
Bracket
132
083
Slat
Hardware
S11
4 x #8 x 2" Wood Screw
9 x #7 x 5/8" Pan Screw
S37
37
Slat
081
S37
x 3 per
bracket
131
Other Parts
3 x Corner Bracket