Advertisement
Step 57: Assemble Rock Wall
Part 1
It is important to note hole orientation for the following steps.
A: In the upper left hand opening of the Rock Wall, center 1 (571) Rock Wall B making sure that it's flush to the
bottom. Install board with 6 (S20) #8 x 1-3/8" Wood Screws.
B: Place (572) Rope Support across the top of the upper opening with the rope hole to the right. Rope Support
should be flush with the upper nest floorboards. Attach using 4 (S20) #8 x 1-3/8" Wood Screws.
C: Taking care to note the hole orientations, place (573,574,575,576)Rock Wall D, E, F and G from left to right so
they are evenly spaced in the bottom opening. It is important to ensure that the rope hole in (575) Rock Wall F
is at the bottom. Attach each board using 6 (S20) #8 x 1-3/8" Wood Screws.
Fig. 57.1
S20
x 6 per
board
Wood Parts
1 x
Rock Wall B 5/8 x 5-1/4 x 56-1/16"
571
1 x
Rock Wall D 5/8 x 4-1/4 x 57"
573
1 x
Rock Wall E 5/8 x 4-1/4 x 57"
574
1 x
Rock Wall F 5/8 x 4-1/4 x 57"
575
1 x
Rock Wall G 5/8 x 4-1/4 x 57"
576
572
571
573
574
1 x
Rope Support 5/8 x 3 x 17-3/16"
572
34 x
S20
101
Flush
S20
x 4 per
board
rope hole
x 6 per
S20
board
576
575
rope hole
Hardware
#8 x 1-3/8" Wood Screw
Advertisement
