KidKraft Cedar Summit F25745E Installation And Operating Instructions Manual page 82

Step 42: Install TNR Floor Supports
A: From inside the assembly attach (421) TNR Floor Support to each Side Support using 1 (H3) ¼ x 2-1/2" Hex Bolt
(with lock washer, flat washer and t-nut) per side. (fig.42.1 and 42.3 )
B: From outside the assembly attach (422) TNR Front Support to (421) TNR Floor Support using 1 (H3) ¼ x 2-1/2" Hex
Bolt (with lock washer, flat washer and t-nut) per side, making sure to maintain a distance of 5/8" (15.9mm) between
the top of the (422) TNR Front Support and the (421) TNR Floor Support. (fig. 42.1 and 42.2)
Fig. 42.1
Wood Parts
1 x TNR Floor Support 1-1/4 x 3-1/4 x 29-3/8"
421
1 x TNR Front Support 1-1/4 x 2-1/2 x 24-1/4"
422
422
Fig. 42.3
Inside View
H3
421
4 x
H3
Fig. 42.2
Outside View
1/4" Flat
Washer
per side
H3
1/4" T-Nut
Hardware
1/4 x 2-1/2" Hex Bolt
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
82
422
H3
1/4" Lock
Washer
422
421
1/4" T-Nut
421
5/8"