Advertisement
Step 17: Door Panel Assembly
Part 4
F: In the notched out opening of (172) Door Stop attach the Magnetic Catch using 2 (S38) #7 x 1-1/8" Pan
Screws. (fig. 17.7) Important: Use a hand held screw driver and DO NOT over tighten.
G: On the inside of the assembly, attach (172) Door Stop to (073) Narrow Front Panel with 3 (S11) #8 x 2" Wood
Screws, making sure (172) Door Stop overhangs (073) Narrow Front Panel by 1-1/4" and is in position to receive
the Catch Plate. (fig. 17.8 and 17.9).
Fig. 17.7
S38
Fig. 17.9
Outside View
073
Wood Parts
1 x
Door Stop 1 x 2-1/2 x 10"
172
172
Magnetic Catch
172
1-1/4"
Hardware
2 x
S38
3 x
S11
Fig. 17.8
Inside View
073
#7 x 1-1/8" Pan Screw
#8 x 2" Wood Screw
47
172
S11
Other Parts
1 x Magnetic Catch
Advertisement
