Ricoh MP CW2201 Field Service Manual page 80

Hide thumbs Also See for MP CW2201:

Table of Contents

2. Installation

With the marks aligned (

of the stand fit into the holes at the bottom of the main unit frame.

Fit each screw with a lock washer.

Use an Allen key to fasten the left and right sides of the stand to the bottom of the main

unit with the hex-head screws and lock washers (

• Make sure that each screw is tightly fastened.

), lower the main unit so that the positioning pins on either end

x3 hex socket bolt)

Troubleshooting

Do you have a question about the MP CW2201 and is the answer not in the manual?