Table of Contents
Advertisement
4. Replacement and Adjustment
Ink Collector Unit Contact Switch
Preparation
• Open the ink collector cover (p.243) and remove the ink collector tank (p.531)
• Remove the maintenance unit (p.534)
1.
The sensor is located at [A].
2.
Use the tip of a small screwdriver to release both sides of the sensor [B].
3.
Pull the harness and sensor through hole [A].
4.
Free the harness [B] (
5.
Disconnect and remove the sensor [C] (
Reinstallation
532
x6).
x1).
Advertisement
Table of Contents
Troubleshooting
