5. System Maintenance Reference
NVRAM Data Upload/Download
Uploading Content of NVRAM to an SD card
Do the following procedure to upload SP code settings from NVRAM to an SD card.
• This data should always be uploaded to an SD card before the NVRAM is replaced.
• Make sure that the write protection of an SD card is unlocked.
1.
Do SP5-990-001 (SP Print Mode: All (Data List)) before you switch the machine off. You
will need a record of the NVRAM settings if the upload fails.
2.
Switch the copier main power switch off.
3.
Remove the SD slot cover [A]. (
630
× 1)