Table of Contents
Advertisement
3.
Remove the scanner left cover [B]. (
4.
Remove the scanner right cover [A]. (
Original Table
1.
Raise the scanner unit to the full upright position (p.254).
2.
Remove the scanner left cover and scanner right cover (p.260).
3.
Remove the screw [B] on the left of the original table [A]. (
• To attach the original table, be sure to mount this screw on the left side.
4.
Remove the tapping screw [D] on the right of the original table [C]. (
• To attach the original table, be sure to mount this screw on the right side.
x1)
x1)
x1: M4x10)
Common Procedures
x1)
261
Advertisement
Table of Contents
Troubleshooting
