Precaution; Head Lift Motor - Ricoh MP CW2201 Field Service Manual

Hide thumbs Also See for MP CW2201:

Table of Contents

Precaution

The sheets are attached to the eight FFCs at the lower part of the HRB. To attach the FFCs to the HRB,

connect the FFCs by holding the sheets.

• To remove the head lift motor, never loosen nor remove the four screws shown below (the figure

below shows the main unit with the right cover removed).

Uncap the print head and move the carriage unit to the center of the main unit (p.267).

• When the carriage unit is moved, ink may spill out from the print head onto the platen. To

move the carriage unit, place a sheet of plain paper under the carriage unit to protect the

• The sheet under the carriage unit should be flat, with no paper wrinkling, which could scratch

the nozzle face or cause clogging of the nozzle.

Carriage Unit