Procedure; Update Procedure - Ricoh MP CW2201 Field Service Manual

Hide thumbs Also See for MP CW2201:

Table of Contents

5. System Maintenance Reference

Firmware type

LanguageWidget

• Even when not using a RPCS driver, the XPS driver requires RPCS firmware.

Procedure

• A SD card is a precision device, so when you handle an SD card, respect the following.

• When the power is switched ON, do not insert or remove a card.

• During installation, do not switch the power OFF.

• Since the card is manufactured to high precision, do not store it in a hot or humid location, or in

direct sunlight.

• Do not bend the card, scratch it, or give it a strong shock.

• Before downloading firmware on an SD card, check whether write-protection of the SD card is

canceled. If write-protection is enabled, an error code (error code 44, etc.) will be displayed

during download, and the download will fail.

• Before updating firmware, remove the network cable from this machine.

• If SC818 is generated during software update, switch the power OFF -> ON, and complete the

update which was interrupted.

• During software update, network cables, remove interface cables, wireless boards, etc., (so that

they are not accessed during update).

1. First download the software to be updated to the SD card.

2. Switch the power OFF.

Smart Operation Panel-CPU

Smart Operation Panel-CPU

Smart Operation Panel-CPU

Smart Operation Panel-CPU

Message display

M2a_SimpleScan

M2a_SmartCopy

M2a_SmartScan

M2a_WLanguage