Faulty Maintenance Unit; Image Abraded, Paper Torn, Ink Running; Gap Adjustment; Paper Feed Obstruction - Ricoh MP CW2201 Field Service Manual

Hide thumbs Also See for MP CW2201:

Table of Contents

After the flushing, if the Nozzle Check Pattern is still not perfect, let the machine remain

idle for 8 hours.

Execute three more cleanings and one flushing.

• Be sure to print a Nozzle Check Pattern after each cleaning and the flushing.

• When you have produced an unbroken Nozzle Check Pattern, you can stop.

Faulty Maintenance Unit

• Clean the maintenance unit

• Replace maintenance unit.

Output not clean, paper corner bent

• Print head abrasion

• Dog-eared corner of paper

• Make sure that the gap between the carriage and the platen has been adjusted correctly for the

type and thickness of the paper.

• Inspect the platen for paper fragments or dirty plates. Clean the plates.

• Check around the carriage unit for paper fragments.

• Check around the maintenance unit for paper fragments.

Printing Problems