4. Replacement and Adjustment
• During bypass paper feed, the trailing edge of the paper comes out of the machine briefly
and then feeds back into the machine. If the harnesses of the roll unit are hanging down, they
could interfere with paper in the bypass paper feed path.
Roll Unit 2 (Option)
Remove
1.
Remove the roll unit 2.
• The roll unit 2 can be removed with the same procedure as the roll unit 1.
2.
Remove the rear cover (p.544).
3.
Release the clamps at the lower part of the PCB box. (
4.
Remove the connector [A] from CN300 of the RFDB and CN255 [B] from IOB.
322
x4).