How To Check If The Firmware Downloaded With Reserve - Ricoh MP CW2201 Field Service Manual

Successful Download
In the two diagrams below, the firmware is set to be downloaded by the day before the next
scheduled visit. In the first diagram, the download is successful on the first try. In the second
diagram, the download fails three times and is successful on the fourth try.
• If the firmware download fails or cannot be completed due to the network settings/condition, no
power to the machine, or other reason, the machine will continue retrying every six hours until the
scheduled deadline (up to a maximum of four tries). For example, if the download is set for the day
before the next visit, the machine will attempt the download at 24 hours before the visit, and then
continue trying every six hours (max. four tries total).
• The retry is only performed in cases when the firmware download has failed.
• If the machine is in Energy Saver mode when the download is scheduled to begin, the download
will be performed in the background and the machine/panel will stay in Energy Saver mode.
• The download will continue uninterrupted even if the customer initiates a print job, copy job, fax
receiving or other operation while the download is in progress.
• The download will be terminated if the customer turns the power off while the download is in
progress.
• If the download cannot be completed successfully by the time of the next scheduled visit, the
machine will stop trying to download the firmware.

How to Check if the Firmware Downloaded with RESERVE

1. Enter the SP mode.
Package Firmware Update
613