Table of Contents
Advertisement
Operating modes
10.4
OFF operating mode
Stop of production from HMI!
Actions:
10.5
Operating mode: AUTO
Polymer solution production
70
Stop of production from HMI!
Login
Conc:
Capac.: l/h
Dilution
Bar
Water
OFF
Fig. 46: Stop of production from HMI!
Function: Stops production from the HMI.
Switch the unit to OFF operating mode.
n
1.
This is the operating mode required for:
Starting calibration,
n
on page 62
Start-up procedures,
n
sion' on page 73 , Ä Chapter 10.8 'Start-up: Medium
version' on page 74 , Ä Chapter 10.9 'Start-up: Comfort
version' on page 75
Changing identity codes: only for "SERVICE" operators
n
2.
With the Basic version, the solenoid valve V1 for the
n
supply of raw water is closed.
With the Medium version, the solenoid valve V1 for the
n
supply of raw water, and the control valve(s) VC1/VC2
are closed.
With the Comfort version, all the controllable valves are
n
closed.
Polymer solution production
Login
Conc:
Capac.: l/h
Dilution
Bar
Water
AUTO
Fig. 47: Polymer solution production
Polymer
Drain
RESET
ARCHIVES
Ä Chapter 9.7 'Calibration'
Ä Chapter 10.7 'Start-up: Basic ver‐
Polymer
Drain
ARCHIVES
RESET
Product
A3628
Product
A3630
Advertisement
Table of Contents
