Table of Contents
Advertisement
9.5.3 Sub-menu: Measurement
9.5.4 Sub-menu: Trends
Raw water valve V1
Flushing valve V2
Drain valve V3
Control valve VC1 and VC2
INFO!: The system is pre-configured, and no settings are needed
in the Measurement sub-menu for start-up.
Tab. 16: Sub-menu: Measurement
Pressure measurement inlet PI1
Pressure measurement outlet PI2
Raw water flow FIC1
Post-dilution flow FIC2
External signal 4 ... 20 mA concentration
External signal 4 ... 20 mA capacity / system output
The grey arrow keys are used to select individual views
The following graphically prepared trend data of the key system
parameters can be called up:
Tab. 17: Sub-menu: Trends
Capacity / System output
Concentration
Pressure measurement PI1 and PI2
Consumption of emulsion
Operation of the system
59
Advertisement
Table of Contents
