Set up
8.4 Selecting the operating mode (MODE menu)
28
To match the pump to your process requirements, you must
observe the following procedure:
'MODE' menu select the operating mode.
1.
In the
2.
If necessary make the settings for this operating mode in the
menu.
Continuous
display
Fig. 17
Exceptions: Timer and PROFIBUS
Note the diagram.
'MODE' menu (dependent on the identity code, some operating
In the
modes may not be present):
'Manual' : for manual operation (identity code control variant:
n
"Manual", available as standard)
'Analog' : for current control (identity code control variant: "Analog cur‐
n
rent")
'Contact' : for contact operation (identity code control variant:
n
"External 1:1" / "External with pulse control")
'Batch' : for batch operation (identity code control variant: "External
n
with pulse control")
1.
MODE
MODE
menu
CODE
CODE
menu
2 s
P
2.
SET
SET
menu
CLEAR
CLEAR
window
.
®
'SET'
B0084