Operation of the system
Sub-menu: Control
Sub-menu: Service
9.4 Over structure of the operating menus
Tab. 13: Over structure of the operating menus
Operating
ULIa
menu
Tab
Level 1
Level 2
Parameter
Process
Motor / Valves
Measurement
Trends
56
Sub-menu; Control – only the following sub-menus can be changed
by operators:
Concentration
n
Production
n
Capacity
n
Factory settings
n
Sub-menu; Control – these sub-menus are reserved for Service:
Monitoring
n
Valves
n
Booster pump
n
This menu can only be changed by Service.
Level 3
Stirrer P2, polymer
Polymer pump P3
Raw water valve V1
Control valves VC / VC2
Drain valve V2
Product valve V3
Pressure inlet PI1
Pressure inlet PI2
Raw water flow FI1
Raw water flow FI2
External concentration value
External output value
System output
Concentration
Pressure inlet PI1
Tabs and levels
Inputs / Information
Pressure and flow conditions,
safety shut-down
Setting values, operating data,
delay times
Measured values, Measuring
ranges, Limit values, Simulation
values
Graphic display