Sub-Menu: Communication; Service; Inputs And Outputs; Changing The Identity Code - ProMinent DULCODOS ULIa Assembly And Operating Instructions Manual

Operation of the system

9.9.5 Sub-menu: Communication

9.10

Service

9.10.1

Inputs and outputs

9.10.2

Changing the identity code

9.10.3

Error monitoring

66
Ä Chapter 10.15 'Option: Modbus/Profibus/Profinet data com‐
See
munication' on page 78
Stop of production from HMI!
Service
Login
INPUTS
OUTPUTS
Conc:
FAILURE
Capac.:
CONTROL
COMMISSIONING
bar
MAINTENANCE
Fig. 43: Service
The values of analogue and digital inputs and outputs can be con‐
trolled.
Values can be simulated in the event of the failure of a sensor or a
component.
First switch the ULIa to OFF mode.
'Identcode change' in the menu.
1. Click on
2. Change or check the identity code,
code' on page 25
3. Scroll down.
4. Press SAVE for approx. 1 second.
5. Scroll up.
ð The valid identity code appears with a green background.
6. Click on the tab and ULIa
7. Enter the new operating mode.
Measured values, motor and valve settings can be checked
IDENTCODE
CHANGE
FAT PROCEDURE
A3583
ARCHIVES
Ä Chapter 2 'Identity