PAUSE enabled
PAUSE again disabled
10.11 ARCHIVES - RESET
Alarm and warning history
10.12 Option: Post-dilution
If the function is PAUSE enabled:
Any running polymer preparation process is stopped and
n
–
The liquid concentrate pump P3 is stopped.
–
The solenoid valve for raw water V1 closes.
–
The stirrer P2 stops.
No new preparation is started.
n
The "Polymer preparation" output signal is disabled.
n
–
A customer-side feedback signal is emitted.
Functionality - PAUSE again disabled:
The "Pressure build-up" process is automatically enabled with
n
the Comfort version.
–
Repeat the complete start-up procedure after a longer
period of standstill.
This cannot be done automatically for the Basic and Medium
n
version.
–
Repeat the complete start-up procedure.
Stop of production, FAULT!
Time
Date
Login
Conc:
Capac.: l/h
AUTO
Fig. 49: Alarm and warning history
Press ARCHIVES:
The alarm and warning history are displayed.
n
The detailed display of faulty system statuses, status dis‐
n
plays,...
Press RESET:
Errors can be acknowledged.
n
Requirement:
n
–
They have been eliminated or settings corrected,
–
Or settings corrected.
Ä Chapter 6.3.1 'Option: Post-dilution'
Technical data, see
on page 43 and Ä Chapter 11.3 'Setting the liquid concentrate
empty signal sensor' on page 82 .
Operating modes
Alarm and maintenance history
Please change battery - Warning level 1 / No. 8
Polymer pump P3 not calibrated - Fault level 3 / No. 5
Stirrer P2 - MCB
Polymer pump P3 not calibrated - Fault level 3 / No. 5
ARCHIVES
A3632
RESET
77