Start Menu-Connect-Rs-232C - Panasonic KX-TDA100 Programming Manual

2.2.3 Start Menu—Connect—RS-232C
Connects to the PBX in Interactive mode through the serial RS-232C interface of the PBX.
This option allows direct entry of connection parameters, for cases where the PC is used to connect to one or
just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to multiple PBXs and
would prefer to choose from among pre-saved profiles instead, see 2.2.8 Start Menu—Connect—Profile
Setup for more details about creating profiles.
To connect to the PBX by RS-232C
1.
From the start menu, select Connect.
The Login window will be displayed.
2.
Select a connection option.
•
Select a Profile Name if you want to use a pre-saved profile. This option is only available when one
or more profiles have been previously stored.
a.
Select the profile to use from the drop-down list.
b.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be entered.
•
To enter the parameters manually, select the PBX Model and confirm that the RS-232C radio button
is selected.
a.
Specify the settings as required. For more details, see the table below.
b.
Enter the system password for the PBX.
3.
Click Connect.
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Values
COMx
2400, 4800, 9600, 19200,
38400, 57600, 115200
2.2.3 Start Menu—Connect—RS-232C
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
PC Programming Manual 37