Activation Key File - Panasonic KX-TDE100 Installation Manual

2.1.3

Activation Key File

The corresponding number of IP CO lines and IP telephones or enhanced features can be activated by
installing the downloaded activation key file(s) in the SD Memory Card of the IPCMPR card using the KX-
TDE Maintenance Console.
Installing the Activation Key File in the SD Memory Card
Make sure to install the KX-TDE Maintenance Console on the PC in advance, and connect the PC to the
PBX. For details about the KX-TDE Maintenance Console, refer to "Guide for the KX-TDE Maintenance
Console".
1.
Start the KX-TDE Maintenance Console from the Start menu on the PC.
2.
From the Utility menu, select File Transfer PC to PBX (SD Card).
A dialogue box will be displayed.
3.
Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
4.
Click OK.
Note
It is necessary to restart the PBX to activate the UCAV2 activation key after performing the procedure
above. To restart the PBX, refer to "5.1.4 Using the Reset Button".
CAUTION
The activation key file can only be installed in the PBX with the MPR ID number entered when the
activation key file was downloaded. The activation key file cannot be reissued unless the IPCMPR card
crashes.
2.1 Information about the Activation Keys
Installation Manual 45