Removing The Shipping Brace; Figure 40: Removing The Shipping Brace - Allied Telesis SwitchBladex8112 Installation Manual

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide

Removing the Shipping Brace

Now that the chassis is installed in the equipment rack, you may remove
the shipping brace from the front of the unit. To remove the shipping brace,
remove the six mounting screws with a #2 Phillips-head screwdriver (not
provided). Refer to Figure 40.
Shipping Brace Screws
Figure 40. Removing the Shipping Brace
After removing the shipping plate, go to "Installing the Chassis Grounding
Wire" on page 110.
Section II: Installing the Chassis 109