Allied Telesis AT-9800 Series Release Note

Software Maintenance Release Note
Release sb273-01
For SwitchBlade 4000 Series Switches and
AT-9800 Series Switches
Introduction
This software maintenance release note lists the issues addressed, and
enhancements made, in patch SB273-01 for Software Release 2.7.3 on existing
models of the SwitchBlade and AT-9800 series switches. Release file details are
listed in Table 1.
Table 1: Release file details for release SB273-01.
Base Software Release File
Maintenance Release Date
Compressed Release File Name
Compressed Release File Size
This release note should be read in conjunction with the following documents:
■
SwitchBlade document Set for Software Release 2.7.3 (Document Number
C613-03100-00 REV A).
■
AT-9800 Series Switches Documentation Set for Software Release 2.7.3
(Document Number C613-03101-00 REV A).
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
SB-273.rez
April 22 2005
SB262-01.rez
91,532 bytes