Table of Contents
Advertisement
Chapter 16: Building a Stack
312
Table 30. Descriptions of the STACK ENABLE Command Messages
Message
Save the config and restart the
system for this change to take
effect.
3. Enter the EXIT command to return to the Privileged Exec mode.
awplus(config)# exit
awplus#
4. Enter the COPY RUNNING-CONFIG command to save your changes:
awplus# copy running-config startup-config
5. Continue to the next procedure to check the feature licenses on the
switch.
Description
This message reminds you that
you need to save the configuration
change and reboot the switch to
activate stacking. The next two
steps have you save your
changes, You will reboot the switch
later in these procedures.
Section III: Building a Stack with VCStack Plus
Advertisement
Table of Contents
Troubleshooting
