Allied Telesis SwitchBladex8112 Installation Manual page 93

Table of Contents

SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide

To reduce the risk of electric shock, the PoE ports on this product

must not connect to cabling that is routed outside the building where

this device is located.  E40

This product may have multiple AC power cords installed. To de-

energize this equipment, disconnect all power cords from the device.

An Energy Hazard exists inside this equipment. Do not insert hands

or tools into open chassis slots or sockets.  E44

This equipment shall be installed in a Restricted Access location. 

High Leakage Current exists in this chassis. Connect external

ground wire before connecting AC power supply(s).

Section II: Installing the Chassis

Troubleshooting