Allied Telesis SwitchBladex8112 Installation Manual page 69

Section I: Hardware Overview
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
Table 20. Components on the AT-SBx81CFC960 Controller Fabric Card
Component
Slots for Transceivers
Console RS-232 Port
NET MGMT (eth0) Port
USB Port
Reset Button
Description
Supports four 10Gbps SFP+ transceivers.
The transceivers may be used for these
two functions:
- Uplink ports for the Ethernet line cards.
- A trunk between two chassis with the
VCStack Plus feature.
The transceivers are ordered separately.
For a list of supported transceivers, refer
to the Allied Telesis web site. For more
information, refer to "SFP+ Slots" on
page 78.
Provides local management of the switch.
The switch does not require an IP address
for local management. For more
information, refer to "Console (RS-232)
Port" on page 80.
Provides maintenance access to the
controller card. For more information, refer
to "Ethernet Management Port (NET
MGMT)" on page 81.
Used with a USB flash memory drive for
management functions, such as storing
backup copies of the switch configuration
and transferring configurations between
switches. For more information, refer to
"USB Port" on page 83.
Resets the controller and Ethernet line
cards. For more information, refer to
"Reset Button" on page 84.
69