Allied Telesis SwitchBladex8112 Installation Manual page 262

Chapter 13: Replacing Modules
262
Caution
Keep the card level as you slide it out of the chassis. You might
damage the components on the top or bottom of the card if you slide
it out at an angle. Refer to Figure 64 on page 135.
7. Do one of the following:
 For instructions on how to install the line card in another slot of the
chassis or a different chassis, refer to "Installing the Ethernet Line
Cards" on page 150.
 If you do not plan to immediately install another line card in the
same slot, cover the slot with a blank cover. For instructions, refer
to "Installing Blank Slot Covers" on page 155.
 If you do not plan to immediately install the card in another chassis,
continue with this procedure.
8. Store the line card in an anti-static bag.
9. Return the line card to its shipping container.
Section II: Installing the Chassis