Figure 147: Initialization Messages For A Stand-Alone Switch - Allied Telesis SwitchBladex8112 Installation Manual

Verifying release... OK
Booting...
Starting base/first...
Mounting virtual filesystems...
Allied Telesis Inc.
AlliedWare Plus (TM) v5.4.4
Current release filename: SBx81CFC960-5.4.4-0.0.rel
Original release filename: SBx81CFC960-5.4.4-.0.rel
Built: Thu Dec 19 21:30:52 NZDT 2013
Mounting static filesystems...
Checking flash filesystem...
Mounting flash filesystem...
Checking for last gasp debug output...
Checking NVS filesystem...
Mounting NVS filesystem...
Starting base/setup-eth..
Starting base/dbus...
Starting base/syslog...
Starting base/lif_ok...
Starting base/loopback...
Starting base/poe_done...
Starting base/sysctl...
.
.
.
Received event modules.done
Received event board.inserted
Received event hardware.done
Starting network/startup...
Starting base/external-media...
Starting network/stackd...
Starting network/internal-tftpd...
Starting network/internal-boop...
08:00:46 awplus-1.5 chassis[2138]: Card 1.6 (AT-SBx81CFC960) has joined the
chassis
Received event network enabled
Initializing HA processes:
exfx, hostd, hsl, nms, atmfd, auth, bgpd
cntrd, epsr, imi, imiproxyd, irdpd, lacp, lldpd
loopprot, mstp, ospf6d, ospfd, pdmd, pim6d, pimd
ripd, ripngd, rmon, sflowd, udidd, vrrpd
Section II: Installing the Chassis
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
login" prompt.
Figure 147. Initialization Messages for a Stand-alone Switch
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
[ OK ]
219