Allied Telesis SwitchBladex8112 Installation Manual page 71

Table of Contents

Advertisement

Section I: Hardware Overview
SwitchBlade x8112 Chassis Switch and AT-SBx81CFC960 Card Installation Guide
controller card.
The chassis may have either one or two controller cards.
Two controller cards are recommended for redundancy and to
increase the per slot backplane bandwidth from up to 80 to
160Gbps.
The controller cards are installed in slots 5 and 6 in the chassis.
Here are other features of the controller card:
LEDs for monitoring the status of the Ethernet line cards.
Power-saving eco-friendly button for turning the port and status
LEDs on and off on the line cards and control cards.
Reset switch for resetting the chassis.
USB port for data storage and retrieval.
Console RS-232 for local management.
NET MGMT port and inband interface for remote Telnet, SSH, and
SNMP management.
Hot swappable.
71

Advertisement

Table of Contents
loading

Table of Contents