At-Sbx81Xs16 Sfp+ Line Card; Leds; Figure 23: At-Sbx81Xs16 Line Card - Allied Telesis SwitchBladex8112 Installation Manual

Chapter 2: Ethernet Line Cards

AT-SBx81XS16 SFP+ Line Card

LEDs

50
The AT-SBx81XS16 Line Card, shown in Figure 23, is an Ethernet switch
that supports 10Gbps SFP+ transceivers.
Figure 23. AT-SBx81XS16 Line Card
Here are the main features of the line card:
 Sixteen slots for 10Gbps SFP+ transceivers
 Supports 10GBase-SR/LR fiber optic transceivers
 Supports AT-SP10TW direct connect twinax cables with SFP+
transceiver-style connectors
 Port Link/Activity (L/A) LEDs
 32K entry MAC address table
 32 Mb buffer memory
 Jumbo frame support of up to 10240 bytes
 Hot swappable
For a list of supported transceivers, refer to the SwitchBlade x8100 data
sheet on the Allied Telesis web site.
Note
The AT-SBx81XS16 Line Card is supported in slots 1 to 4, 8, and 10
in the AT-SBx8112 Chassis. The card is not supported in slots 7, 9,
11, and 12.
Note
The line card is not supported by the AT-SBx81CFC400 Controller
Fabric Card.
The AT-SBx81XS16 Line Card has one LED for each SFP+ slot. The LED
is shown in Figure 24 on page 51 and described in Table 12 on page 51.
Section I: Hardware Overview