Table of Contents
Advertisement
2
1
Fig. Drum gearbox
1. Drain plug
2. Filler plug
3. Level plug
5
3
4
5
1
2
Fig. Engine compartment
1. Water cooler
2. Charge air cooler
3. Hydraulic fluid cooler
4. Condenser element AC (Optional)
5. Screws (x 2)
2019-10-01
Drum gearbox - Oil change
Wipe clean, unscrew the plugs (1, 2 and 3) and drain
the oil into a suitable receptacle, capacity about 5.0
liters (5,3 qts.).
Refit the drain plug (1) and fill with oil up to the level
plug (3), according to "Drum gearbox - Checking the
oil level".
Use transmission oil according to the lubricant
3
specification.
Clean and refit the level plug (3) and filler plug (2).
Radiator - Check/Cleaning
Check that air can pass unobstructed through the
radiators (1), (2) and (3).
Clean a dirty radiator using compressed air or a
high-pressure water jet.
Undo the two screws (5) and tilt the condenser
element upwards.
Blow air or direct water through the cooler in the
opposite direction to that of the cooling air.
4812158701_G.pdf
Maintenance - 1000h
Be careful when using a high-pressure washer -
Be careful when using a high-pressure washer -
do not place the nozzle too close to the radiator.
do not place the nozzle too close to the radiator.
Wear protective goggles when working with
Wear protective goggles when working with
compressed air or high-pressure water jets.
compressed air or high-pressure water jets.
137
Advertisement
Table of Contents
