Coolant Level - Check; Diesel Engine Check Oil Level - Fayat Group DYNAPAC CA5000 Instruction Manual

Hide thumbs Also See for DYNAPAC CA5000:
Table of Contents

Advertisement

Fig. Expansion tank
1. Filler cap
2. Level indicator
1
Fig. Engine compartment
1. Dipstick
108

Coolant level - Check

Place the roller on a flat surface and check the level of
1
the coolant (2). Top up with coolant if the level is too
low.
2
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.

Diesel engine Check oil level

The dipstick is located beside the engine's oil and fuel
filter.
Pull up the dipstick (1) and check that the oil level is
between the upper and lower marks. For further
details, refer to the engine's instruction manual.
4812158701_G.pdf
Take great caution if the radiator cap must be
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
opened while the engine is hot. Wear protective
gloves and goggles.
gloves and goggles.
Flush the system every other year and change
Flush the system every other year and change
the coolant. Make sure also that the air flow
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
through the cooler is unobstructed.
Take care not to touch any hot parts of the engine
Take care not to touch any hot parts of the engine
or the radiator when removing the dipstick. Risk
or the radiator when removing the dipstick. Risk
for burns.
for burns.
Maintenance, 10h
2019-10-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynapac ca5500Dynapac ca6000Dynapac ca6500

Table of Contents