Table of Contents
Advertisement
Fig. Cover, left side
1. Battery disconnector switch
80
1
4812158701_G.pdf
Master switch
Before leaving the roller for the day, switch the master
switch (1) to the disconnected position and remove the
handle.
Before switching off the battery isolation switch,
Before switching off the battery isolation switch,
wait for at least 30 seconds after the ignition lock
wait for at least 30 seconds after the ignition lock
has been switched off, in order to avoid the
has been switched off, in order to avoid the
engine's electronic control unit (ECU) sustaining
engine's electronic control unit (ECU) sustaining
damage.
damage.
This will prevent battery discharging and will also
make it difficult for unauthorized persons to start and
operate the machine. Also lock the hood to the engine
compartment.
Operation
2019-10-01
Advertisement
Table of Contents
