Table of Contents
Advertisement
1.
1.
Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.
Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.
2.
2.
Ensure that all instructions in the MAINTENANCE section are followed and the
Ensure that all instructions in the MAINTENANCE section are followed and the
steering hitch lock is unlocked.
steering hitch lock is unlocked.
3.
3.
Turn the master switch to the ON position.
Turn the master switch to the ON position.
4.
4.
Move the forward/reverse lever to the NEUTRAL position. Sit down in the seat.
Move the forward/reverse lever to the NEUTRAL position. Sit down in the seat.
5.
5.
Activate the parking brake.
Activate the parking brake.
6.
6.
Disengage the emergency stop.
Disengage the emergency stop.
7.
7.
Set the engine speed switch to idle (LO).
Set the engine speed switch to idle (LO).
8.
8.
Start the engine and allow it to warm up.
Start the engine and allow it to warm up.
9.
9.
Set the engine speed switch to Mid/working mode.
Set the engine speed switch to Mid/working mode.
10. Deactivate the parking brake.
10. Deactivate the parking brake.
11. Drive the roller. Operate the F/R lever with care.
11. Drive the roller. Operate the F/R lever with care.
12. Test the brakes. Remember that the braking distance will be longer if the
12. Test the brakes. Remember that the braking distance will be longer if the
hydraulic fluid is cold.
hydraulic fluid is cold.
13. Set the transportation/working mode button in position working mode.
13. Set the transportation/working mode button in position working mode.
14. Use vibration only when the roller is in motion.
14. Use vibration only when the roller is in motion.
15. IN AN EMERGENCY:
15. IN AN EMERGENCY:
- Press the EMERGENCY STOP.
- Press the EMERGENCY STOP.
- Hold the steering wheel firmly.
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop.
- Brace yourself for a sudden stop.
16. When parking:
16. When parking:
- Activate the parking brake.
- Activate the parking brake.
- Switch off the engine and block the drum and wheels if the roller is on an inclined
- Switch off the engine and block the drum and wheels if the roller is on an inclined
surface.
surface.
17. When lifting: - Refer to the relevant section in the Instruction Manual.
17. When lifting: - Refer to the relevant section in the Instruction Manual.
18. When towing: - Refer to the relevant section in the Instruction Manual.
18. When towing: - Refer to the relevant section in the Instruction Manual.
19. When transporting: - Refer to the relevant section in the Instruction Manual.
19. When transporting: - Refer to the relevant section in the Instruction Manual.
20. When recovering - Refer to the relevant section in the Instruction Manual.
20. When recovering - Refer to the relevant section in the Instruction Manual.
2019-10-01
Operating instructions - Summary
Operating instructions - Summary
4812158701_G.pdf
91
Advertisement
Table of Contents
