Table of Contents
Advertisement
Wipe clean on both sides of the outlet
pipe.
Inner edge of
Outer edge of outlet
outlet pipe.
pipe.
1
Fig. Planetary gear/drainage position
1. Plug
148
Air cleaner
- Cleaning
Wipe clean the inside of the cover (2) and the filter
housing (5). See the previous illustration.
Wipe also both surfaces for the outlet pipe; see
adjacent figure.
Check that the hose clamps between the filter
Check that the hose clamps between the filter
housing and the suction hose are tight and that
housing and the suction hose are tight and that
the hoses are intact. Inspect the entire hose
the hoses are intact. Inspect the entire hose
system, all the way to the engine.
system, all the way to the engine.
Rear axle planetary gear - Oil change
Position the roller with the plug (1) at its lowest
position.
Wipe clean, unscrew the plug (1) and drain the oil into
a suitable receptacle. The volume is approximately
1.85 liters (1.95 qts).
Oil should be taken to your local waste disposal
Oil should be taken to your local waste disposal
station.
station.
4812158701_G.pdf
Maintenance - 2000h
2019-10-01
Advertisement
Table of Contents
