Drum Gearbox - Oil Change; Steering Hitch - Tightening - Fayat Group DYNAPAC CA4600 Instruction Manual

Table of Contents

Advertisement

2
1
Fig. Drum gearbox
1. Drain plug
2. Filler plug
3. Level plug
Fig. Steering hitch
1. Nut
122

Drum gearbox - Oil change

Wipe clean, unscrew the plugs (1, 2 and 3) and drain
the oil into a suitable receptacle, capacity about 5.0
liters (5,3 qts.).
Refit the drain plug (1) and fill with oil up to the level
plug (3), according to "Drum gearbox - Checking the
oil level".
Use transmission oil according to the lubricant
3
specification.
Clean and refit the level plug (3) and filler plug (2).

Steering hitch - Tightening

1
Actual torque (Nm) should be when the machine's
position is straight ahead.
M16
M16
4812163801.pdf
Maintenance, first 50h
Nobody must be allowed near the steering joint
Nobody must be allowed near the steering joint
when the engine is running. Risk of being
when the engine is running. Risk of being
crushed when the steering is operated. Switch
crushed when the steering is operated. Switch
off the engine and activate the parking brake
off the engine and activate the parking brake
before lubricating.
before lubricating.
270 Nm
270 Nm
2019-04-30

Advertisement

Table of Contents
loading

Table of Contents