Table of Contents
Advertisement
Fig. The display shows the selection in
the middle (tortoise, drum spin, wheelspin
or hare).
68
Carefully move the forward/reverse lever (2) forwards
or backwards, depending on which direction of travel
is required.
Speed increases as the lever is moved away from the
neutral position.
Driving on difficult surfaces
If the machine should get stuck, select the gear
position that is most suitable for the situation using the
gear position switch.
• Drum slipping - select Drum spin mode (gear position 2)
• Rear tires slipping - select Wheelspin mode (gear position
3)
Reset to the original position when the machine has
regained traction.
Slopes
To optimize available pulling force and protect the
machine's engine against over-revving while working
or during transport driving on steep slopes (>10%),
you must select low gear.
Never drive with a higher gear/at a faster speed that
the machine requires to climb up the same slope!
4812158701_G.pdf
Operation
2019-10-01
Advertisement
Table of Contents
