Operation; Before Starting; Master Switch - Switching On; Operator's Seat - Adjustment - Fayat Group DYNAPAC CA5000 Instruction Manual

Fig. Cover, left side
1. Battery disconnector switch
2
1
Fig. Operator's seat
1. Lock pack- Length adjustment
2. Weight adjustment
3. Back support angle
4. Seat belt
2019-10-01

Operation

Before starting

Master switch - Switching on

Remember to carry out daily maintenance. Refer to
the maintenance instructions.
The battery disconnector switch is located inside the
cover by the steps on the left-hand side of the roller.
Turn the key (1) to the On position. The roller is now
supplied with power.
1

Operator's seat - Adjustment

Adjust the operator's seat so that the position is
comfortable and so that the controls are within easy
reach.
The seat can be adjusted as follows.
4
3
4812158701_G.pdf
The cover must be unlocked when operating, so The cover must be unlocked when operating, so
that the battery can be quickly disconnected if that the battery can be quickly disconnected if
necessary. necessary.
- Length adjustment (1)
- Weight adjustment (2)
- Back support angle (3)
Always make sure that the seat is secure before Always make sure that the seat is secure before
beginning operation. beginning operation.
Do not forget to use the seatbelt (4). Do not forget to use the seatbelt (4).
Operation
59