Fig. Hood
1. Hinge
1
Fig. Tractor frame
1. Drain plug
2
Fig. Engine compartment
2. Oil filter
2019-10-01
1
4812158701_G.pdf
Maintenance measures - 500 h
Hood, hinges - Lubrication
Lubricate engine hood hinges (1) and the slide rails of
the operator's seat with grease, other joints and
controls with oil. Lubricate the cab hinges with grease.
See the lubrication specification.
Diesel engine - Oil and Filter change
The oil drain plug (1) can be accessed most easily
from the right rear underside of the tractor frame, and
is installed with a hose in the engine.
Drain the oil when the engine is warm. Place a
receptacle that holds 19 liters (5 gal) under the drain
plug.
Replace the engine oil filter (2) at the same time. Refer
to the engine manual.
Take great care when draining warm fluid and oil.
Take great care when draining warm fluid and oil.
Wear protective gloves and goggles.
Wear protective gloves and goggles.
Hand in the drained oil and filter to an
Hand in the drained oil and filter to an
environment-friendly waste disposal station.
environment-friendly waste disposal station.
129