Table of Contents
Advertisement
No
No
Designation
Designation
25
25
Parking brake
Parking brake
26
26
Hazard indicators (Optional)
Hazard indicators (Optional)
27
27
Rotating beacon (Optional)
Rotating beacon (Optional)
28
28
Reserve
Reserve
29
29
Gear position switch, Dip
Gear position switch, Dip
30
30
Burnout delay DPF Filter (Tier
Burnout delay DPF Filter (Tier
IIIB/4i)
IIIB/4i)
2019-10-01
Symbol
Symbol
Function
Function
When pressed, the parking brake is activated.
When pressed, the parking brake is activated.
To release the brakes, slide the red part backwards
To release the brakes, slide the red part backwards
(towards you) and change the position of the lever.
(towards you) and change the position of the lever.
NB! When starting the machine, the parking brake
NB! When starting the machine, the parking brake
must be activated.
must be activated.
To activate the brakes, press the top of the switch to
To activate the brakes, press the top of the switch to
change the position of the switch.
change the position of the switch.
To disengage the brakes, press down the red part at
To disengage the brakes, press down the red part at
the same time as the switch, and change the position
the same time as the switch, and change the position
of the switch.
of the switch.
NOTE! When starting the machine, the parking brake
NOTE! When starting the machine, the parking brake
must be activated.
must be activated.
Activate the hazard warning light by depressing the
Activate the hazard warning light by depressing the
button.
button.
Activate the rotating beacon by pressing the switch. (If
Activate the rotating beacon by pressing the switch. (If
the machine has two rotating beacons, both are
the machine has two rotating beacons, both are
activated)
activated)
Activates the four different gear positions. (1) Hare, (2)
Activates the four different gear positions. (1) Hare, (2)
Drum spin, (3) Wheelspin and (4) Tortoise. The current
Drum spin, (3) Wheelspin and (4) Tortoise. The current
gear position is shown in the display by means of the
gear position is shown in the display by means of the
following figures.
following figures.
1: Transport mode
1: Transport mode
2: Used if the drum is slipping.
2: Used if the drum is slipping.
3: Used if the rear tires are slipping.
3: Used if the rear tires are slipping.
4: Working mode.
4: Working mode.
Delay burnout of the DPF filter (approx. 20 min.) by
Delay burnout of the DPF filter (approx. 20 min.) by
pressing and holding the switch for 3 sec.
pressing and holding the switch for 3 sec.
4812158701_G.pdf
Machine description
37
Advertisement
Table of Contents
