Fig. Steering hitch
1. Nut (24mm)
156
Steering hitch - Tightening
Nobody must be allowed near the steering joint
Nobody must be allowed near the steering joint
when the engine is running. Risk of being
when the engine is running. Risk of being
crushed when the steering is operated. Switch
crushed when the steering is operated. Switch
off the engine and activate the parking brake
off the engine and activate the parking brake
1
before lubricating.
before lubricating.
To do this torque control, you need a torque wrench
that can handle at least 300 Nm.
The easiest way to identify if you have this type of
steering hitch is that it has a new type of nut (24mm)
(1) at the top, as shown.
Actual torque should be 270 Nm when the machine's
position is straight ahead.
4812158701_G.pdf
Maintenance - 2000h
2019-10-01