Fayat Group DYNAPAC CA5000 Instruction Manual page 84

Display symbol Display symbol
72
Sound Sound Soot Soot
level level
>100% >100%
Beep Beep >=100% >=100%
Long beep Long beep >100% >100%
Long beep Long beep >=114% >=114%
>=114% >=114%
Buzzer Buzzer >125% >125%
>143% >143%
4812158701_G.pdf
Comment Comment
This view appears after an active selection in This view appears after an active selection in
the display screen. the display screen.
Normal burnout is taking place; if possible do Normal burnout is taking place; if possible do
not turn off the machine until burnout is not turn off the machine until burnout is
complete, approx. 25 min. or 100% reached. complete, approx. 25 min. or 100% reached.
Burnout delayed due to low engine Burnout delayed due to low engine
temperature. temperature.
The temperature of the engine must be above The temperature of the engine must be above
70°C before burnout can start. 70°C before burnout can start.
Burnout delayed due to other engine fault. Burnout delayed due to other engine fault.
One of the stipulated requirements is not One of the stipulated requirements is not
satisfied and burnout is delayed. satisfied and burnout is delayed.
Engine temperature below 70°C. Engine temperature below 70°C.
Other engine fault Other engine fault
"Keep engine running" is displayed if burnout "Keep engine running" is displayed if burnout
is in progress or if there is a delay due to low is in progress or if there is a delay due to low
engine temperature or other engine fault. engine temperature or other engine fault.
Allow the engine to run until burnout is Allow the engine to run until burnout is
complete. complete.
The engine's output is reduced by 30% and The engine's output is reduced by 30% and
vibration may stop working. vibration may stop working.
Allow the engine to run until burnout is Allow the engine to run until burnout is
complete. complete.
"Red warning" flashes on the panel. The "Red warning" flashes on the panel. The
engine's output is reduced by 30% and max. engine's output is reduced by 30% and max.
1200 rpm. 1200 rpm.
DEUTZ service must be contacted DEUTZ service must be contacted
Operation
"Yellow "Yellow
warning" warning"
Flashes for a Flashes for a
few seconds, few seconds,
then lights then lights
continuously continuously
for 2 min. for 2 min.
0.5Hz 0.5Hz
1Hz 1Hz
1Hz 1Hz
1Hz 1Hz
2019-10-01